Originals are hard to come by and very expensive. Old insulation can also be prone to cracking/disintegration.
In this case, 1.92 x 17.8 mm female crimp Molex connectors were used. An awl was used to expand them to the correct size as they were too small for the pins on the solenoid. It goes without saying, but I’m going to say it anyway. This cable is intended to be used with a Graflite synchronizer, and should never be plugged into an electrical outlet.
Strip the wires
Tin the wires
Attach and solder the connectors
Heat shrink the connectors
Make the plug
Enjoy!
